Skip to content
KAJK Constructors

Best solar panels: how to compare them for a Canadian roof

The best solar panels for your roof are the ones whose datasheet fits it: enough efficiency for the space, a temperature coefficient close to zero, a front load rating above the local snow load, a recognized Canadian certification mark and a long power warranty. We compare them with you at a free assessment for solar panels in Ottawa.

Drone view from straight above an Orléans hip roof with a stepped array of black solar panels
2.4 kPaOttawa's 1-in-50-year ground snow load in SB-1, the same 2,400 Pa that IEC 61215 tests a panel's face at, at least
On this page
  1. What separates one solar panel from another
  2. Why efficiency matters most on a small roof
  3. Monocrystalline, n-type and bifacial panels
  4. Why the temperature coefficient matters in Ottawa
  5. How a panel's snow load rating compares with Ottawa's code
  6. Certification marks, warranties and the Ontario rebate form
  7. How KAJK chooses panels for your property
  8. Compare panels with KAJK
  9. Questions

What separates one solar panel from another

Brand lists change every year. Six lines on the datasheet decide how a panel performs on an Ottawa house:

Efficiency
The share of sunlight a panel turns into electricity. The US Department of Energy puts factory-made modules at 20% to 22% in real use.
Rated power
Watts per panel at standard test conditions: 1,000 W/m² of sunlight and a cell temperature of 25 °C.
Temperature coefficient
How much power the panel gains or loses for each degree its cells sit away from 25 °C. Closer to zero is steadier.
Mechanical load rating
The front (snow) and back (wind) pressure the frame and glass were tested to, in pascals.
Certification mark
A mark from an agency the Electrical Safety Authority (ESA) recognizes, such as CSA, ULC, UL or Intertek.
Warranties
A product warranty for defects, and a power warranty for the output left after a set number of years.

Why efficiency matters most on a small roof

Efficiency decides how many watts fit on each square metre. On a roof with one good face, or several small ones broken up by dormers and vents, a more efficient panel puts more kW on the same area.

Panels on our own install videos show how far that has moved. The 2022 Greely roof carries 10.5 kW on 28 panels, about 375 watts each. A home on our January 2025 video (Showcase #29) carries 13.5 kW on 27 panels, about 500 watts each, by our arithmetic from each video's size and count. Every install is on our solar projects page.

On open land, efficiency matters less: a ground mount has room for more panels.

Monocrystalline, n-type and bifacial panels

Monocrystalline silicon made up 96% of global solar shipments in 2022, by the Department of Energy's count, so the mono or poly question is mostly settled. The newer split is inside monocrystalline cells.

PERC cells overtook the older aluminum back-surface-field design around 2018. The market is now moving to n-type cells, TOPCon and heterojunction (HJT), a shift the Department of Energy says efficiency drives.

Bifacial panels also collect light on their back face, a gain they earn where light reaches the back, as on a solar carport rather than flush on a shingled roof.

Why the temperature coefficient matters in Ottawa

Panels lose power as their cells heat up and gain it as they cool. The pvlib modelling library gives typical temperature coefficients of -0.2% to -0.5% per °C, measured from the 25 °C rating.

Read the coefficient for summer. An Ottawa array makes the most in July, 125 kWh per kW of panels against 57 in November, by Natural Resources Canada's (NRCan) monthly figures. A hot July roof is where a coefficient close to zero keeps the most output.

  • A cell 30 °C above its rating loses about 9% on a panel rated -0.30% per °C, and about 12% at -0.40%, by our arithmetic.
  • A cell 20 °C below its rating gains about 4% to 10% across the typical range, which is why a sunny winter day holds up well.

Month-by-month output, and what snow does to it, is in our guide to solar panels in winter.

How a panel's snow load rating compares with Ottawa's code

Ontario's Building Code climate data (Supplementary Standard SB-1) sets Ottawa's 1-in-50-year ground snow load at 2.4 kPa, and 2.5 kPa in Kanata. That is 2,400 to 2,500 pascals.

The panel test standard, IEC 61215, presses at least 2,400 Pa on each face for an hour, and many makers rate their panels higher, at 3,600, 4,000 or 5,400 Pa, Canal Solar's test review notes. So read the front load figure on the datasheet, not only the word "certified".

The roof carries that snow too, so the City of Ottawa asks for a professional engineer licensed in Ontario to design the system and review it on site. What we check is in our guide to whether your roof is ready for solar panels.

Certification marks, warranties and the Ontario rebate form

Three checks before you sign, and each one is on paper:

A recognized Canadian mark
ESA requires electrical products to be approved by an accredited agency before they are used or sold in Ontario, and installing unapproved equipment is against the law. Look for CSA, ULC, or the Canadian marks of UL, Intertek, TÜV Rheinland or Nemko.
A power warranty you can measure against
The Canadian Renewable Energy Association (CanREA) gives 25 years as an example of a system's warrantied life. A National Renewable Energy Laboratory review found a median output loss of 0.5% a year, a yardstick for the warranty's year-25 figure.
The details the rebate form asks for
The Home Renovation Savings pre-installation checklist (October 2025) asks for the panels' nameplate capacity in kW-DC, manufacturer, model and country of manufacture. The concept design lists each one.

What the rebate pays, and the rule against pairing it with net metering, is in our Ontario solar rebate guide.

How KAJK chooses panels for your property

Panels are picked after the design, never before, in the order we run every job:

Consultation
A visit to your roof and electrical panel, and a year of bills.
Design
Site modelling of the roof and its shade, and a power-loss calculation for the cables and equipment.
Procurement
We acquire the best quality materials for your project at the lowest cost possible. The concept design names the panels, with costs, plans and warranties, in one document.
Construction
Anchors, rails, then panels, as our video "The Steps to Solar: Anchors to Panels" shows, with the ESA notification filed.
Warranty, operation and maintenance
Warranty support and repair and maintenance, on our systems and on other installers' too.

Crystal D-S wrote on Google: “Every step of the process was thoroughly explained.” KAJK is listed in CanREA's active member directory.

Compare panels with KAJK

KAJK Constructors, an Ottawa solar installer since 2016, designs and installs solar for homes, businesses and farms, mainly between Alfred and Pickering.

Call (613) 869-8254 or book a free assessment, and we will put the datasheets for your roof side by side.

Our process is simple

If you need solar energy solutions, we'll be there from conception to completion. We have the experience and accreditation to lead the way in all phases of your solar project. Here's what you can expect.

  1. Consultation

    From your initial assessment to project management, budgeting, scheduling and acquiring your permits, we handle all major aspects of your project.

  2. Design

    We design your solar project to ensure that it meets your needs in the most affordable way possible. We do it all, including system designs to as-built drawings.

  3. Procurement

    We acquire the best quality materials for your project at the lowest cost possible, giving you the best value for your dollar.

  4. Construction

    Our project manager leads all construction projects to ensure that installation, construction and maintenance projects go smoothly and efficiently.

  5. Warranty, operation & maintenance

    Once your system is running, we stay with it: warranty support, operation, maintenance and repairs, including on systems other installers put in.

Questions we get asked

What brand of solar panel is best?

No brand is best on every roof. Compare datasheets on efficiency, temperature coefficient, front load rating and power warranty, and check for a mark ESA recognizes. We name the panels for your property in the concept design.

Who makes the best solar panels in Canada?

Every panel sold in Ontario has to meet the same bar: an approval mark from an agency ESA recognizes before the panel is used in Ontario. The Home Renovation Savings rebate form asks for the country of manufacture, so where a panel is made goes on the record either way.

What are the most powerful solar panels on the market?

Factory-made modules run at 20% to 22% efficiency in real use, by the Department of Energy's figures, while monocrystalline cells top 27% in the lab. On our install videos, each panel works out between about 360 and 560 watts, most of them 400 to 500.

Do solar panels work on cloudy days?

Yes, at lower output. NRCan's monthly Ottawa figures give a kW of south-facing panels 57 kWh in November, the darkest stretch of the year, against 125 in July. Net metering carries summer's surplus into those months.

How are solar panels installed?

On a roof the order is anchors, rails, then panels, then the wiring to the inverter. The City of Ottawa requires a building permit for solar collectors of 5 m² or more on a building, and the electrical work is filed with ESA.

Sources for this page (12), last read 2026-11-19
  1. Crystalline Silicon Photovoltaics Research (last updated 2025-12-17)US Department of Energy, Solar Energy Technologies Office, read 2026-11-19
  2. PVWatts (point value models, DC module IV)Sandia National Laboratories, PV Performance Modeling Collaborative, read 2026-10-10
  3. pvlib.pvsystem.pvwatts_dcpvlib python (documentation, version 0.16.1), read 2026-10-10
  4. Photovoltaic potential and solar resource maps of Canada: municipality database (kWh/kWp), OttawaNatural Resources Canada, read 2026-11-16
  5. 2024 Building Code Compendium, Volume 2: MMAH Supplementary Standard SB-1, Climatic and Seismic Data, Table 2Publications Ontario (Ministry of Municipal Affairs and Housing), read 2026-10-01
  6. Mechanical load tests of photovoltaic modules (Canal Solar Magazine, 11th edition)Canal Solar, read 2026-11-19
  7. Solar collector systems (Do I need a building permit?)City of Ottawa, read 2026-11-09
  8. Recognized Approval MarksElectrical Safety Authority (ESA), read 2026-11-12
  9. Go Solar Guide 2024Canadian Renewable Energy Association (CanREA), read 2026-11-19
  10. Photovoltaic Degradation Rates: An Analytical Review (2012-06-01)National Renewable Energy Laboratory (Jordan and Kurtz), via OSTI, read 2026-11-19
  11. Solar and Battery Storage Pre-Installation Application Checklist (version October 2025)Home Renovation Savings (IESO), read 2026-11-19
  12. Active member directory: Kajk Constructors IncCanadian Renewable Energy Association, read 2026-10-01
Aerial view of black rooftop solar panels KAJK installed on an Orléans home in Ottawa

Contact KAJK's solar energy experts

Ready to get started? Give us a call or send us a quick message for all your solar and green energy needs. The free assessment looks at your roof or site, your last year of electricity use and what you want the system to do, then comes back with a concept design, costs and the equipment we would use.

Book a free assessment(613) 869-8254

Monday to Friday, 9 a.m. to 5 p.m.
Saturday and Sunday: closed, visits by appointment